OEM Wet Wipes Manufacturing Process
From raw materials and formulation preparation to converting, filling, packaging and quality inspection, every OEM wipes project moves through a defined manufacturing process.
See how RIWAY turns an approved product specification into commercial-scale production.
Start Your Project Talk to Our TeamA Structured Process for OEM & Private Label Wipes
A wipes production line is only one part of an OEM project. The process starts before manufacturing begins.
Material selection, formulation, wipe dimensions, folding, liquid loading, packaging and quality requirements all need to be confirmed before a product can move into commercial production.
RIWAY works through these stages with customers so that the approved product specification can be translated into a repeatable manufacturing process.
- Product specification confirmation
- Substrate and material preparation
- Water and formulation preparation
- Wipe converting and folding
- Liquid filling and packaging
- Inspection and finished-goods handling

See Where Your Wipes Project Comes to Life
Take a closer look at RIWAY's office, production environment and manufacturing operations behind our OEM and private label projects.
This company overview shows RIWAY's working environment, production facilities and manufacturing operations.
From Approved Specification to Finished Wipes
A typical OEM wet wipes project moves through the following manufacturing stages after product specifications are approved.
Raw Materials
Nonwoven substrate, packaging and other required materials are prepared according to the approved specification.
Water Treatment
Purified production water is prepared before liquid formulation processing.
Formula Mixing
Liquid ingredients are dosed and mixed according to the approved formulation.
Wipe Converting
Nonwoven material is converted, cut or perforated and folded into the required wipe format.
Liquid Filling
The prepared liquid is applied according to the defined loading requirements.
Packaging
Wipes are packed, sealed, labeled and processed according to the selected packaging configuration.
Quality Inspection
Key product and packaging parameters are checked during and after manufacturing.
Finished Goods
Approved products are packed, stored and prepared for international shipment.

The Process Starts With the Right Substrate
The nonwoven substrate directly affects softness, strength, absorbency, thickness, dispensing performance and the positioning of the finished wipes.
Before production, material specifications are confirmed according to the approved product requirement.
- Material composition
- GSM / basis weight
- Wipe dimensions
- Texture or embossing
- Wet and dry strength requirements
- Absorbency and hand feel

Purified Water for Wet Wipes Production
Water is a major component of many wet wipes formulations, making water preparation an important stage of the manufacturing process.
RIWAY uses water-treatment equipment as part of the preparation process before the liquid formulation enters mixing and filling.
Production parameters are managed according to the requirements of the specific product and manufacturing process.

Dosing & Mixing the Liquid Formula
After water preparation, formulation ingredients are measured and processed according to the approved product formula.
Stainless-steel processing equipment supports the controlled preparation and mixing of liquid formulations before filling.
Depending on the project, the formula may be based on a standard solution, adjusted from an existing concept or developed for a specific private label requirement.
- Approved formulation
- Ingredient preparation
- Dosing and mixing
- Batch identification
- Pre-filling checks

Cutting, Perforating & Folding
The nonwoven material is converted into the required finished-wipe dimensions and dispensing format.
The converting configuration depends on the type of product, packaging format and intended user experience.
- Sheet size
- Cutting or perforation
- Fold configuration
- Wipe count
- Dispensing requirements

Applying the Prepared Formula
Prepared liquid is applied to the converted wipes according to defined manufacturing parameters.
The filling process is matched to wipe composition, pack count, package format and product requirements.
In-process controls help maintain consistency between the approved product specification and commercial production.
Soft Pack Wet Wipes Production
See how standard soft-pack wet wipes move through converting, liquid filling, sealing and downstream packaging during commercial production.
This production example demonstrates a typical commercial manufacturing route for standard soft-pack wet wipes.

Sealing, Labeling & Final Packaging
Packaging is an important part of both product protection and the final consumer experience.
Depending on the project, production may include primary pack sealing, label or lid application and secondary packaging.
- Soft packs
- Single sachets
- Canisters
- Jars
- Custom pack counts
- Private label artwork

Packaging Details Matter
For private label wipes, packaging performance is closely connected with manufacturing consistency.
Positioning, sealing, labeling and pack presentation are checked during production according to the approved project specification.
Artwork, pack structure and packaging components should therefore be finalized before commercial production is released.
Canister Wipes Manufacturing Process
Canister wipes follow a different converting and packaging route from standard soft-pack wet wipes.
Depending on the specification, rolled or perforated wipes are prepared, loaded into the canister, filled with liquid formulation and completed with the required lid, label and outer packaging.
This is a good example of why the final packaging format needs to be confirmed early in the OEM development process.
Explore Packaging OptionsInspection Throughout the Production Process
Quality control is not limited to a final check. Relevant product and packaging parameters are reviewed at different stages of manufacturing.


Incoming materials are reviewed against project requirements.
Key production parameters are monitored during manufacturing.
Pack sealing, appearance and configuration are evaluated.
Finished goods are reviewed before release and shipment.
Storage & Shipment Preparation
After manufacturing and inspection, finished goods move into warehouse management and shipment preparation.

Incoming Materials
Material inventory supports production planning and commercial manufacturing.

Finished Goods
Approved products are organized and prepared for customer shipment.
Build the Right Product Specification
Mass production becomes much easier when the substrate, formula and packaging requirements are clearly defined during product development.
Wipes Material
Compare composition, GSM, texture, dimensions and other substrate options.
Explore Substrates →Packaging Options
Explore soft packs, sachets, canisters, jars and other OEM packaging formats.
Explore Packaging →Start Your Project
Tell us your target product and requirements so we can evaluate the suitable manufacturing route.
Start Your Project →Frequently Asked Questions About Wet Wipes Production
How are wet wipes manufactured?
A typical wet wipes manufacturing process includes material preparation, water treatment, formula preparation, wipe converting and folding, liquid filling, packaging, inspection and finished-goods handling. The exact process varies by product and packaging format.
When is the formula prepared during wet wipes production?
The liquid formula is normally prepared before filling. Ingredients are processed according to the approved formulation and manufacturing requirements before the liquid is applied to the wipes.
Can the wipe size and folding method be customized?
Yes. Sheet dimensions, fold configuration, pack count and dispensing requirements can be defined during product development according to the selected packaging format.
Can RIWAY customize the nonwoven substrate?
Yes. Material composition, GSM, texture, dimensions and related specifications can be selected according to the target application and product positioning.
Can RIWAY manufacture private label wet wipes?
Yes. RIWAY supports OEM and private label projects covering substrate selection, formulation, wipe specification, packaging configuration, artwork coordination and commercial production.
Do soft-pack wipes and canister wipes use the same production process?
Not exactly. The basic stages such as material preparation, formula preparation and quality control are similar, but converting, filling and packaging equipment may differ according to the final packaging format.
How is quality checked during production?
Relevant raw material, process, product and packaging parameters are reviewed at different production stages according to the approved project requirements.
Can we approve samples before mass production?
Yes. Sampling allows the customer and production team to confirm important product characteristics before commercial manufacturing begins.
Ready to Turn Your Wipes Concept Into Production?
Tell us the application, substrate, wipe size, formula, packaging format and target market. Our team can help you work through the next steps.
Start Your Project Contact RIWAY